Waste Liquid And Waste Gas Incinerator-Shandong Lvbei Energy Saving Environmental Protection Equipment Manufacturing Co., Ltd

Waste Liquid And Waste Gas Incinerator

Introduction of Waste Liquid And Waste Gas Incinerator

This Waste Liquid And Waste Gas Incinerator is an incinerator dedicated to treat liquid.The pyrolysisat high temperature up to 850-1100° to fully decompose organics in waste liquid and harmful compound such as chlorine, benzene and phenol. It’s especially adapted to organic waste liquid of high concentration and widely used in the industries such as ship building,chemical engineering.

Feature of Waste Liquid And Waste Gas Incinerator

1. Waste Liquid And Waste Gas Incinerator Adopt Micro-negative pressure design, safe combustion, control program with the function of preventing ignition before removal of flammable and combustible gas from the incinerator to avoid gas explosion.
2. High degree of automation, overall online inspection control, stable combustion.
3. Patented atomizing nozzle to spray very fine particles so that they are gasified, oxidized and decomposed without dropping in the furnace.
4. Tangent combustion atomization device integrating mixing two-fluid atomizer. High degree of mixing, good effect of atomizing, high speed of combustion, low content of surplus air, greatly saving fuel.
5. Good effect of turbine, combustion retention time of at least 2 seconds, no dead angle in combustion.
6. Simultaneous treatment of waste oil, waste liquid and waste solution, using waste to treat waste, low operation cost.
7. Low-nitrogen combustion technology without smoke, odor and toxic gas, simultaneous incineration of organic waste gas and small quantity of solid.
8. Incinerator dedicated to salty waste water designed according to characteristics and composition of waste water to prevent slagging of inorganic salts in incineration and formation of mist.
9. Perfect and reasonable off-gas purifier to ensure the conformity to emission standard.

Principle of Waste Liquid And Waste Gas Incinerator

The low temperature pyrolysis mode is used to separate the organics from the waste water with high content of salt by means of pyrolysis and gasification. The salt powder particles in the waste water are separated at low temperature. The combustible gas pyrolyzed from the first combustion room is decomposed at high temperature in the second combustion room so as to ensure that the salt doesn’t melt to save fuel. The subsequent off-gas purifying system ensures that the off-gas is conform to the emission standard in GB18484-2001.